Deif GC-1F Installation Instructions

GC-1F Installation Instructions and Reference Handbook
DEIF A/S Page 91 of 123
Parameter table description
The table consists of the following possible adjustments:
Set point: The alarm set point is adjusted in the set point menu. The setting can be in
percentage of the nominal values.
Timer (delay): The timer setting is the time that must expire from the alarm level is
reached until the alarm occurs.
Relay output A: A relay can be activated by output A.
Relay output B: A relay can be activated by output B.
Enable: The alarm can be activated or deactivated. ON means always activated.
Auto acknowledge: Alarms are auto-acknowledged when the alarm becomes inactive.
Inhibits: It is possible to inhibit some of the alarms. This means it is only activated
when the running feedback signal is present.
Inhibit functions:

Deif GC-1F Specifications

General

Brand	Deif
Model	GC-1F
Category	Controller
Language	English