V0505, 2.20
Control keys:
•Store
After you have completed the bend sequence a CNC-program can be generated. This generated
program will be stored in the controller program memory.
2.7. Variants programming
The term ‘Variants programming’ means that the operator can make modifications to an exist-
ing program in the graphic menu, without having to build a new CNC program from scratch.
An existing program can be altered without loss of existing corrections and bendsequence. If
such an existing program contains proper axis values and product positions then this informa-
tion can stay intact, only the latest changes (angle, sheet length) are recalculated and entered
into the program.
For instance, when a side length has been altered in the graphical bend overview and the
‘store’ command is given, then a question appears how to compute a CNC program.
Function keys secondary row:
show.
bendseq.
To show a mosaic screen with a step-by-step graphical
overview of the bendsequence.
show
library
Softkey to get a graphical overview of the tool library.
Zoom enlargement
Zoom reducement
To Next Page
Loading...
