Dell Alienware Area-51 R3 Threadripper Edition User Manual

Replacing the bottom tron-lighting cable
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps
in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1. Route the bottom tron-lighting cables through the slot on the chassis.
2. Route the bottom tron-lighting cables through the routing guide on the chassis.
3. Secure the bottom tron-lighting cables to the chassis using the securing clip.
4. Connect the bottom tron-lighting cables to the logo board.
Post-requisites
1. Replace the
base panel.
2. Replace the rear bezel.
3. Replace the
front bezel.
4. Replace the handle bars.
5. Replace the PCI fan.
6. Replace the full-length graphics cards.
7. Replace the left and right side-panels. See “
Replacing the side panels”.
8. Replace the stability foot.
116

Dell Alienware Area-51 R3 Threadripper Edition Specifications

General

Brand	Dell
Model	Alienware Area-51 R3 Threadripper Edition
Category	Desktop
Language	English