Dell Alienware Area-51 R3 Threadripper Edition User Manual

Replacing the memory modules
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps
in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1. Align the notch on the bottom of the memory module with the tab on the memory-module slot.
2. Insert the memory module into the memory-module connector until the memory module snaps into position and the securing clip
locks in place.
NOTE: If you do not hear the click, remove the memory module and reinstall it.
a. memory module
b. memory-module slot
c. notch
Post-requisites
1. Replace the left and right side-panels. See “Replacing the side panels”.
2. Replace the stability foot.
48

Dell Alienware Area-51 R3 Threadripper Edition Specifications

General

Brand	Dell
Model	Alienware Area-51 R3 Threadripper Edition
Category	Desktop
Language	English