Dell Alienware Area-51 R3 Threadripper Edition User Manual

NOTE: Before you change BIOS Setup program, it is recommended that you write down the BIOS Setup program screen
information for future reference.
Use the BIOS Setup program for the following purposes:
● Get information about the hardware installed in your computer, such as the amount of RAM and the size of the hard drive.
● Change the system configuration information.
● Set or change a user-selectable option, such as the user password, type of hard drive installed, and enabling or disabling base
devices.
Entering BIOS setup program
1. Turn on (or restart) your computer.
2. During POST, when the DELL logo is displayed, watch for the F2 prompt to appear, and then press F2 immediately.
NOTE: The F2 prompt indicates that the keyboard is initialized. This prompt can appear very quickly, so you must watch for
it, and then press F2. If you press F2 before the F2 prompt, this keystroke is lost. If you wait too long and the operating
system logo appears, continue to wait until you see the desktop. Then, turn off your computer and try again.
System setup options
NOTE: Depending on your computer and its installed devices, the items listed in this section may or may not appear.
Table 3. System setup options—Main menu
Main
BIOS Information
BIOS Version Displays the BIOS version number.
Build Date Displays the BIOS release date.
Product Information
Product Name Displays the product name. Default: Alienware Area-51 R3.
Set Service Tag Allows you to enter the service tag of your computer.
Asset Tag Displays the asset tag of your computer.
EC Information
EC Firmware Version Displays the Embedded Controller firmware version.
Memory Information
Total Memory Displays the total computer memory installed.
Memory Available Displays the amount of memory available on the computer.
Memory Technology Displays the type of memory technology used.
Memory Speed Displays the memory speed.
CPU Information
Processor Type Displays the processor type
Processor ID Displays the processor identification code.
CPU Speed Displays the CPU speed.
Cache L2 Displays the processor L2 cache size.
Cache L3 Displays the processor L3 cache size.
Discrete Graphics 1 Displays the first discrete graphics installed on your
computer.
124

Dell Alienware Area-51 R3 Threadripper Edition Specifications

General

Brand	Dell
Model	Alienware Area-51 R3 Threadripper Edition
Category	Desktop
Language	English