Dell Alienware Area-51 R3 Threadripper Edition User Manual

Removing the handle bars
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps
in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1. Remove the stability foot.
2. Remove the left and right side-panels. See “
Removing the side panels”.
Procedure
1. Remove the seven screws (#6-32x6.5) that secure the rear handle-bar to the left side of the chassis.
a. screws (7)
b. chassis
c. rear-handle bar
2. Remove the seven screws (#6-32x6.5) that secure the rear handle-bar to the right side of the chassis.
3. Press the rear-handle bar to release the securing tab and remove the rear-handle bar.
91

Dell Alienware Area-51 R3 Threadripper Edition Specifications

General

Brand	Dell
Model	Alienware Area-51 R3 Threadripper Edition
Category	Desktop
Language	English