Table 4. System setup options—Advanced menu (continued)
Advanced
if the Auto On Time is set to Everyday, Weekdays, or Selected
Days.
Default: Disabled.
Numlock Key Enable or disable Numlock.
Default: Enable Numlock.
Table 5. System setup options—OC menu
OC
AMD CPU Allows you to set OC mode and Custom Pstate0 for the
CPU.
AMD Memory Allows you to set the overclocking and adjust MEM VDDIO,
Table 6. System setup options—Security menu
Security
Unlock Setup Displays if the setup status is unlocked.
Admin Password Allows you to set the administrator password. The
administrator password controls access to the system setup
utility.
System Password Allows you to set the system password. The system password
controls access to the computer at boot.
HDD Password Status Displays if the HDD password is clear or set.
Default: Not set.
HDD1 Password Status Displays if the HDD password is clear or set.
Default: Not set.
HDD2 Password Status Displays if the HDD password is clear or set.
Default: Not set.
HDD3 Password Status Displays if the HDD password is clear or set.
Default: Not set.
Password Change Allows you to permit or deny system password or HDD
password changes. Default: Permitted
Computrace Enable or disable the BIOS module interface of the optional
Computrace Service from Absolute Software.
HDD protection Allows you to set, change, or delete the hard-disk drive
password.
Default: Disabled.
Firmware TPM Enable or disable the firmware TPM.
Default: Enabled.
UEFI Firmware Capsule Updates Enable or disable BIOS updates through UEFI capsule
update packages.
Default: Enabled.
126
To Next Page
Loading...
Need help?
General