Replacing the back cover
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1 Place the back cover on the middle frame and system-board shield and align the tabs on the back cover with the slots on the middle
frame.
2 Slide the back cover in the direction shown to lock the back cover tab under the latch on the system-board shield.
Post-requisite
Replace the stand.
7
22 Replacing the back cover
To Next Page
Loading...
