Replacing the middle frame
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1 Starting from the location shown, slide and align the middle frame to the slots on the display-assembly base. Then snap the middle
frame into place on the display-assembly base.
2 Replace the 16 screws (M3x5) that secure the middle frame to the display-assembly base.
NOTE
: The screws that secure the middle frame to the display-assembly base are black in color and etched with "BP"
around the screw holes.
53
90 Replacing the middle frame
To Next Page
Loading...
