Dell Inspiron 27 7000 All-in-One - 34 Removing the Speakers; Prerequisites; Procedure

Removing the speakers
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the stand.
2 Remove the system-board shield.
3 Remove the back cover.
4 Remove the base cover.
5 Remove the rear-I/O bracket.
Procedure
1 Disconnect the speaker cable from the system board.
2 Remove the nine screws (M3x4+7.1) that secure the speakers to the display-assembly base.
3 Remove the speaker cable from the routing guide on the display-assembly base.
4 Lift the speakers and the speaker cable o the display-assembly base.
34
58 Removing the speakers