Dell Inspiron 27 7000 All-in-One - Post-Requisites

5 Align and place the retractable-camera assembly on the display-panel base.
6 Replace the two screws (M3x5) that secure the retractable-camera assembly to the display-assembly base.
7 Align and place the retractable-camera assembly door on the middle frame.
8 Replace the two screws (M3x5) that secure the retractable-camera assembly door to the middle frame.
9 Connect the camera cable to the system board.
Post-requisites
1 Replace the system-board shield.
2 Replace the back cover.
3 Replace the stand.
50
Replacing the camera