Dell Inspiron 27 7000 All-in-One - 18 Removing the Solid-State Drive;Intel Optane; Prerequisites; Procedure

Removing the solid-state drive/Intel Optane
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the stand.
2 Remove the back cover.
3 Remove the system-board shield.
Procedure
1 Locate the solid-state drive/Intel Optane memory on the system board.
2 Remove the screw (M2x2.5) that secures the solid-state drive/Intel Optane memory to the system board.
3 Slide and remove the solid-state drive/Intel Optane memory from the M.2 card slot on the system board.
18
38 Removing the solid-state drive/Intel Optane