Dell Inspiron 27 7000 All-in-One - 27 Replacing the Camera; Procedure

Replacing the camera
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1 Place the camera module along with the camera bracket and camera cable in the slot on the retractable-camera assembly and snap it
in place.
2 Align the screw holes on the retractable camera bezel with the screw holes on the retractable-camera assembly.
3 Replace the three screws (M3x5) that secure the retractable camera bezel to the retractable-camera assembly.
4 Press the top of the retractable-camera assembly to retract the retractable camera.
27
Replacing the camera 49