Removing the headset port
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the stand.
2 Remove the back cover.
3 Remove the system-board shield.
4 Remove the base cover.
5 Remove the rear-I/O bracket.
6 Remove the speakers.
7 Remove the I/O board.
Procedure
1 Remove the screw (M3x5) that secures the headset port to the display-assembly base.
2 Lift the headset port with its cable from the display-assembly base.
40
66 Removing the headset port
To Next Page
Loading...
