Dell Inspiron 27 7000 All-in-One - 32 Removing the Microphones; Prerequisites; Procedure

Removing the microphones
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the stand.
2 Remove the system-board shield.
3 Remove the back cover.
4 Remove the base cover.
5 Remove the rear-I/O bracket.
Procedure
1 Disconnect the microphones cable from the system board.
2 Remove the microphones cable from the routing guides on the display-assembly base.
3 Remove the four screws (M2x2.5) that secure the microphone modules (4) to the middle frame.
4 Pry and lift the microphone modules (4) o the slots on the middle frame.
32
56 Removing the microphones