Removing the wireless card
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the stand.
2 Remove the back cover.
3 Remove the system-board shield.
Procedure
1 Remove the two screws (M2x2.5) that secure the wireless-card shield to the system board.
2 Remove the wireless-card shield from the system board.
3 Remove the screw (M2x2.5) that secures the wireless card to the system board.
4 Slide and lift the wireless-card bracket o the wireless card.
5 Disconnect the antenna cables from the wireless card.
6 Slide and remove the wireless card out of the wireless-card slot.
16
34 Removing the wireless card
To Next Page
Loading...
