Dell Inspiron 27 7000 All-in-One - 13 Replacing the System-Board Shield; Procedure; Post-Requisites

Replacing the system-board shield
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1 Place and align the screw holes on the system-board shield with the screw holes on the display-assembly base.
2 Replace the ve screws (M3x5) that secure the system-board shield to the display-assembly base.
Post-requisites
1 Replace the back cover.
2 Replace the stand.
13
Replacing the system-board shield 31