Dell Inspiron 27 7000 All-in-One - 30 Removing the Rear-I;O Bracket; Prerequisites; Procedure

Removing the rear-I/O bracket
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the stand.
2 Remove the system-board shield.
3 Remove the back cover.
4 Remove the base cover.
Procedure
1 Remove the three (M3x5) screws that secure the rear-I/O bracket to the display-assembly base.
2 Lift the rear-I/O bracket o the display-assembly base.
30
54 Removing the rear-I/O bracket