Replacing the speakers
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1 Place the speakers on the display-assembly base and align the screw holes on the speakers with the screw holes on the display-
assembly base.
2 Replace the nine screws (M3x4+7.1) that secure the speakers to the display-assembly base.
3 Route the speaker cable through the routing guides on the display-assembly base.
4 Connect the speaker cable to the system board.
Post-requisites
1 Replace the rear-I/O bracket.
2 Replace the base cover.
3 Replace the back cover.
4 Replace the system-board shield.
5 Replace the stand.
35
Replacing the speakers 59
To Next Page
Loading...
