Dell Inspiron 27 7000 All-in-One - 31 Replacing the Rear-I;O Bracket; Procedure; Post-Requisites

Replacing the rear-I/O bracket
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1 Align the slots on the rear-I/O bracket with the ports on the system board.
2 Replace the three screws (M3x5) that secure the rear-I/O bracket to the display-assembly base.
Post-requisites
1 Replace the base cover.
2 Replace the back cover.
3 Replace the system-board shield.
4 Replace the stand.
31
Replacing the rear-I/O bracket 55