Dell Inspiron 27 7000 All-in-One - 10 Removing the Memory Module; Prerequisites; Procedure

Removing the memory module
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the stand.
2 Remove the back cover.
Procedure
NOTE: Depending on the conguration ordered, your computer may have up to two memory modules installed on the system
board.
1 Pry open the DIMM door on the system-board shield to locate the memory module on the system board.
2 Using your ngertips, spread apart the securing clips at each end of the memory-module slot until the memory module pops up.
3 Slide and remove the memory module from the memory-module slot.
10
Removing the memory module 27