Table 34. System setup options—Storage menu(continued)
Storage
Secure Digital (SD) Card Read-Only Mode Enables or disables the SD card read-only mode.
By default, the Secure Digital (SD) Card Read-Only Mode option is disabled.
Table 35. System setup options—Display menu
Display
Primary Display Determines the primary display when multiple controllers are available on the
computer
By default, the Auto option is selected.
Full Screen Logo Enables or disables the computer to display a full-screen logo, if the image
matches screen resolution.
By default, the Full Screen Logo option is disabled.
Table 36. System setup options—Connection menu
Connection
Network Controller Configuration
Integrated NIC Enables or disables the on-board LAN Controller.
By default, the Enabled with PXE option is selected.
Wireless Device Enable
WLAN Enables or disables the internal WLAN device.
By default, the WLAN option enabled.
Bluetooth Enables or disables the internal Bluetooth device.
By default, the Bluetooth option enabled.
Enable UEFI Network Stack Enables or disables the UEFI Network Stack and controls the onboard LAN
Controller.
By default, the Auto Enabled option is selected.
HTTP(s) Boot Feature
HTTP(s) Boot Displays if the computer has HTTP(s) Boot capabilities or not.
By default, the HTTP(s) Boot option is enabled.
HTTP(s) Boot Modes Allows you to set the HTTP(s) Boot Mode for the computer.
By default, the Auto Mode option is selected. HTTP(s) Boot automatically
extracts Boot URL from Dynamic Host Configuration Protocol (DHCP).
Table 37. System setup options—Power menu
Power
USB PowerShare
Enable USB PowerShare Enables external devices to be powered or charged using the stored system
battery even when the computer is in sleep state.
By default, the Enable USB PowerShare option is disabled.
Thermal Management Enables or disables cooling of fan and manages processor heat to adjust the
computer performance, noise, and temperature.
BIOS Setup 141
To Next Page
Loading...
