Figure 15. Installing the front bezel
Steps
1. Align the tabs on the front bezel with the slots on the chassis.
2. Rotate the front bezel towards the chassis and snap it in place.
Next steps
1. Install the side cover.
2. Follow the procedure in After working inside your computer.
Memory module
Removing the memory module
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the side cover.
About this task
The following image indicates the location of the memory and provides a visual representation of the removal procedure.
44
Removing and installing Customer Replaceable Units (CRUs)
To Next Page
Loading...
