1. Retaskable line-out/line-in audio port
Connect recording or playback devices such as microphone or CD player.
Connect speakers.
2. Three DisplayPort 1.4a ports (HBR2 support)
Connect an external display or a projector.
NOTE: The maximum resolution that is supported is up to 4096 x 2304 @ 60 Hz.
3. Three USB 3.2 Gen 1 (5 Gbps) ports
Connect devices such as external storage devices and printers. Provides data transfer speeds of up to 5 Gbps.
4. USB 3.2 Gen 2 (10 Gbps) port
Connect devices such as external storage devices and printers. Provides data transfer speeds of up to 10 Gbps.
5. Two USB 2.0 (480 Mbps) with SmartPower On ports
Connect devices such as external storage devices and printers. Provides data transfer speeds of up to 480 Mbps.
NOTE: When USB wake is enabled in the BIOS the system will power on or wake from hibernation when a USB mouse
or keyboard that is connected to this port is used.
6. Four expansion card slots
Connect a PCI-Express card such as graphics, audio, or network card to enhance the capabilities of your system.
7. Power-cord connector port
Connect a power cable to provide power to your system.
8. Power-supply diagnostic light
Indicates the power-supply state.
9. External puck antenna (optional)
Connect an external puck antenna.
10. Security-cable slot (for Kensington locks)
Connect a security cable to prevent unauthorized movement of your system.
11. Network port
Connect an Ethernet (RJ45) cable from a router or a broadband modem for network or Internet access.
12. Optional port (HDMI 2.1/DisplayPort 1.4a (HBR3 support)/VGA/USB 3.2 Gen 2 (10 Gbps) Type-C with
DisplayPort port)
The port available at this location may vary depending on the optional I/O card installed on your computer.
● HDMI 2.1 port
Connect to a TV, external display or another HDMI-in enabled device. Maximum resolution supported up to 4096 x 2160
@ 60 Hz.
● DisplayPort 1.4a (HBR3 support)
Connect an external display or a projector. Maximum resolution supported up to 5120 x 3200 @ 60 Hz.
● VGA port
Connect an external display or a projector. Maximum resolution supported up to 1920 x 1200 @ 60 Hz.
● USB 3.2 Gen 2 (10 Gbps) Type-C with DisplayPort port
Connect devices such as external storage devices and printers. Provides data transfer speeds of up to 10 Gbps.
Maximum resolution supported up to 5120 x 3200 @ 60 Hz with a Type-C to DisplayPort adapter.
13. Padlock ring
Attach a standard padlock to prevent unauthorized access to the interior of your system.
14. Serial port (optional)
Connect serial I/O devices.
Views of OptiPlex Tower Plus 7020
9
To Next Page
Loading...
