Optional riser cards
Figure 45. 1U riser card for 1U node
1. PCI-E Gen 3 x16 2. microSD card socket
Removing the riser card
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Turn off the system, including any attached peripherals.
3. Disconnect the system from the electrical outlet and disconnect the peripherals.
4. Remove the system board assembly.
5. Remove the expansion card.
Steps
1. Remove the screws that secure the riser card to the expansion card bracket.
2. Pull the riser card away from the expansion card bracket.
100
To Next Page
Loading...
