Figure 8. LAN indicators (management port)
1. speed indicator 2. link and activity indicator
Table 5. LAN indicators (management port)
Component Indicator Condition
Speed indicator Solid green Linking at 1 Gbps speed
Solid amber Linking at 10/100 Mbps speed
Link and activity indicator Off No access or Idle
Blinking green LAN access or Link up
Power and system board indicator codes
The LEDs on the system front panel and back panel display status codes during system startup. For
location of the LEDs on the front panel, see the Front panel features and indicators section. For location
of the LEDs on the back panel, see the Back panel features and indicators section.
Table 6. Status indicator codes
Component Indicator Condition
Power-on indicator (A
bicolor LED on power
button)
Green Solid Power On (S0)
Amber Off
Green Off BMC critical condition event in Power Off mode
(S4/S5)
Amber Blinking
Green Off BMC critical condition event in Power On mode
(S0)
Amber Blinking
System identification
indicator
Steady blue IPMI using Chassis Identify Command On or ID
Button Press ID On
Blinking blue Only IPMI using Chassis Identify Command Blink
On
Off IPMI using Chassis Identify Command Off or ID
Button Press ID Off
Related Links
Front panel features and indicators
Back panel features and indicators
16
To Next Page
Loading...
