Dell PowerEdge C6320 - Cable Routings for SSD and DC to DC Board and LSI 2008

3. DC to DC board
2. Reconnect all the cables.
Next steps
1. Install the system board.
2. Reconnect the peripherals and connect the system to the electrical outlet.
3. Turn on the system, including any attached peripherals.
Cable routings for SSD and DC to DC board and LSI 2008
Table 24. Cable routings for SSD and DC to DC Board and LSI 2008
Item Cable From (LSI 2008 SAS Mezzanine
card)
To (System board)
1 Mini-SAS
cable
Mini-SAS connector 4-7 (J4)
On LSI 2008 SAS Mezzanine Card
SAS/SATA connectors 4&5
2
Mini-SAS connector 0 - 3 (J3)
On LSI 2008 SAS Mezzanine Card
Mini-SAS HD Connector 0-3
3 MicroSATA
cable
1.8-inch SSD Onboard SATA Connector 5 on the
system board
4 1.8-inch SSD DC to DC board (J2)
5 1x4 power
cable
DC to DC to DC board (J1) High Power Connector on the
system board
Figure 33. Cable routings for SSD and DC to DC Board and LSI 2008
Table 25. Cable routings for SSD and DC to DC Board and LSI 2008
Item Cable From (LSI 2008 SAS Mezzanine
card)
To (System board)
Mini-SAS
cable
Mini-SAS connector 4-7 (J4)
SAS/SATA connectors 4&5
81