Dell PowerEdge C6320 - Installing a 3.5-Inch Hard Drive Blank; Removing a 2.5-Inch Hard Drive Blank

Figure 21. Removing or installing a 3.5-inch hard drive blank
1. 3.5-inch hard drive blank
Related Links
Safety instructions
Installing a 3.5-inch hard drive blank
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
Follow the safety guidelines listed in the Safety instructions section.
Steps
Slide the hard drive blank into the drive bay until the hard drive blank is seated in place.
Related Links
Safety instructions
Removing a 2.5-inch hard drive blank
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
CAUTION: To maintain proper system cooling, all empty hard drive bays must have drive blanks
installed.
70