Dell PowerEdge R360 - Upgrade Kits; BOSS-N1 Module Kit

Upgrade Kits
The table lists the available After Point Of Sale [APOS] kits.
Table 67. Upgrade kits
Kits Related links to service instructions
Memory See Installing a memory module
SSD See Installing the drive
GPU See GPU kit
Processor See Installing the processor
Heat sink See Installing the heatsink
Storage controller card See Installing the expansion car into the the expansion card
riser or installing the PERC card to the internal slot
HBA
Network card
Power supplies See Installing a power supply unit
Cables See cable routing
Bezel See Installing the front bezel
Expansion Card See installing the expansion card riser
Power cords NA
BOSS-N1 See Installing the BOSS N1 module
Topics:
• BOSS-N1 module kit
• GPU kit
BOSS-N1 module kit
The BOSS-N1 module supports up to two M.2 NVMe SSDs.
Before you begin the installation or removal process, follow the safety guidelines and before working inside the system
instructions.
Table 68. BOSS-N1 module kit components
Components in kit R360 (quantity)
BOSS-N1 controller card module 1
BOSS-N1 card carrier 1 or 2*
M.2 NVMe SSD 1 or 2*
M.2 NVMe SSD capacity label 1 or 2
†
BOSS-N1 card carrier blank 1
M3 x 0.5 x 4.5 mm screws 1
BOSS-N1 signal cable for mother board (270 mm) 1
8
112 Upgrade Kits