Dell PowerEdge R360 - Processor Specifications; PSU Specifications

Table 5. PowerEdge R360 system weight(continued)
System configuration Maximum weight (with all drives/SSDs)
3.5 inch drives 13.23 kg (29.17 pounds)
A server without drives and PSU
installed
2.5 inch drives 8.36 kg (18.45 pounds)
3.5 inch drives 9.01 kg (19.88 pounds)
Processor specifications
Table 6. PowerEdge R360 processor specifications 
Supported processor Number of processors supported
Intel
®
Pentium G7400/G7400T processor with up to 2 cores One
Intel
®
Xeon E-2400 series processors with up to 8 cores One
PSU specifications
The PowerEdge R360 system supports up to two AC or DC power supply units (PSUs).
Table 7. PSU specifications 
PSU Class Heat
dissipation
(maximum
) (BTU/hr)
Frequency
(Hz)
Voltage AC DC Current
(A)
High line
200–240 V
Low line
100–120 V
600 W Platinum 2250
50/60
100 — 240
V AC
600 W 600 W NA 7.1 - 3.6
NA NA 240 V DC NA NA 600 W 2.9
700 W Titanium 2625
50/60
200 — 240
V AC
700 W NA NA 4.1
NA NA 240 V DC NA NA 700 W 3.4
NOTE: This system is also designed to connect to the IT power systems with a phase-to-phase voltage not exceeding 240
V.
NOTE: Heat dissipation is calculated using the PSU wattage rating.
NOTE: When selecting or upgrading the system configuration, to ensure optimum power utilization, verify the system
power consumption with the Enterprise Infrastructure Planning Tool atDell.com/calc.
Technical specifications 19