Table 77. Drive indicator codes(continued)
Drive status indicator code Condition
Blinks green, amber, and then powers off Indicates that there is an unexpected drive failure.
Blinks amber four times per second Indicates that the drive has failed.
Blinks green slowly Indicates that the drive is rebuilding.
Solid green Indicates that the drive is online.
Blinks green for three seconds, amber for three seconds,
and then powers off after six seconds
Indicates that the rebuild has stopped.
Power button LED
The power button LED is located on the front panel of your system.
Figure 92. Power button LED
Table 78. Power button LED
Power button LED indicator code Condition
Off System is not operating, regardless of power supply available.
On System is operating, one or more of the non-standby power
supply units are active.
Slowly blinking System is performing powering on sequence and iDRAC is still
booting.
124 System diagnostics and indicator codes
To Next Page
Loading...
