Figure 13. PSU power cord
Table 8. PSU power cords
Form factor Output Power cord
Redundant 60 mm 600 W C13 /C14 (inlet)
700 W
Cooling fan specifications
The PowerEdge R360 system supports up to a maximum of four fans, three Brickfielder (BF), and one High performance (HPR)
cooling fan based on the system configuration. These fans are not hot swappable.
Table 9. Cooling fan specifications
Fan type Abbreviation Label color Label image
Standard (STD)
fans
STD No label
High
performance
(HPR) silver fans
HPR Silver
20 Technical specifications
To Next Page
Loading...
