Dell S2810dn

Understanding the Printer Menus 161
Adjust Fusing Unit
NOTE: The print quality changes depending on the setting values you select for this item.
Purpose:
To adjust the temperature setting of the fusing unit for each paper type.
Va lu e s:
Covers Thick 0
*
Available Range:
(Lighten) -5 to (Darken) +10
Rough Surface 0
*
Available Range:
(Lighten) -5 to (Darken) +10
Label 0
*
Available Range:
(Lighten) -5 to (Darken) +10
Envelope 0
*
Available Range:
(Lighten) -5 to (Darken) +10
Postcard JPN 0
*
Available Range:
(Lighten) -5 to (Darken) +10
Plain 0
*
Sets the fusing unit temperature in increments of 1. The default
settings may not give the best output on all paper types. When the
printed paper has curled, try to lower the temperature. When the
toner does not fuse on the paper properly, try to increase the
temperature.
Available Range:
(Lighten) -3 to (Darken) +3
Plain Thick 0
*
Available Range:
(Lighten) -3 to (Darken) +3
Covers 0
*
Available Range:
(Lighten) -3 to (Darken) +3
Covers Thick 0
*
Available Range:
(Lighten) -3 to (Darken) +3
Rough Surface 0
*
Available Range:
(Lighten) -3 to (Darken) +3
Label 0
*
Available Range:
(Lighten) -3 to (Darken) +3
Envelope 0
*
Available Range:
(Lighten) -3 to (Darken) +3