162
Understanding the Printer Menus
Adjust Density
Purpose:
To adjust density level.
Va lu e s:
Chart
Purpose:
To print various charts that can be used for diagnosis of the printer.
Va lu e s:
Clean Developer
Purpose:
To clean the transfer unit.
Va lu e s:
Clean Transfer Unit
Purpose:
To clean the transfer unit.
Va lu e s:
Toner Refresh
Purpose:
To clean the toner in the drum cartridge (and supply new toner from toner cartridge).
NOTE:
Toner Refresh feature uses the toner, and shorten the life of the toner cartridge and the drum cartridge.
Postcard JPN 0
*
Available Range:
(Lighten) -3 to (Darken) +3
Darken 1 to 3 Adjusts the density level darker than the normal setting.
Normal
*
0 Works well with standard typed or printed documents.
Lighten 1 to 3 Adjusts the density level lighter than the normal setting.
Pitch Chart Print Prints a full halftone page. Also prints a page to check the pitch. A
total of two pages are printed.
Full Page Solid 1-Sided Specifies to print a chart of the full page solid on the paper.
2-Sided Specifies to print a chart of the full page solid on both sides of the
paper.
Print Begins to print a full page solid.
Alignment Chart Print Prints a chart to check for proper alignment of the print image on
the paper.
Start Cleans the transfer unit.
Start Cleans the transfer unit.
To Next Page
Loading...
