Denon AVR-4806 - Advanced Operation: Remote Control Resetting; Resetting System Call Buttons Procedure; Resetting Punch Through Setting Procedure; All Reset Function (Factory Default)

79
Advanced Operation
2 Resetting the system call buttons
1
Press the ON and OFF button at the same time.
2
Press the 6 button to select resetting.
3
Press the 3 button to resetting the system call
buttons.
• All buttons of system call will light.
4
Press the MODE SELECTOR button you want to
resetting, then press the
ENTER button.
• The set returns to the normal operating mode.
2 Resetting the punch through setting
1
Press the ON and OFF button at the same time.
2
Press the 6 button to select resetting.
3
Press the 4 button to resetting the punch
through setting.
• All punched through mode buttons will light.
4
Press the MODE SELECTOR button you want to
resetting, then press the
ENTER button.
• The set returns to the normal operating mode.
2 All reset function
1
Press the ON and OFF button at the same time.
2
Press the 6 button to select resetting.
3
Press the +10 button.
• Clear the entire system memory, which will restore
the remote control unit to the factory default
settings. This operation will take approximately 20
seconds.
Only use this if you wish to clear all customized
settings and memories and restore the unit to its out-
of-the-box factory default settings.