DEWESOFT IOLITE - Connectors; Ethernet - in

IOLITE®
TECHNICAL REFERENCE MANUAL
6.2.2. Connectors
Connector used on the device is a standard ethernet connector (RJ45).
Standard ethernet cable with standard connector can be used to connect IOLITE-RPT with a device.
6.2.2.1. EtherNET - IN
EtherCAT connector: pin-out (RJ-45 female)
Pin
Name
Description
1
TX_P
Transmission +
2
TX_N
Transmission -
3
RX_P
Reception +
4
DC +
PoE +
5
DC +
PoE +
6
RX_N
Reception -
7
DC -
PoE -
8
DC -
PoE -
6.2.2.2. EtherNET - OUT
EtherCAT connector: pin-out (RJ-45 female)
Pin
Name
Description
1
TX_P
Transmission +
2
TX_N
Transmission -
3
RX_P
Reception +
4
DC +
PoE +
5
DC +
PoE +
6
RX_N
Reception -
7
DC -
PoE -
8
DC -
PoE -
Hint
The power over ethernet is passive. This means that there are no data signals on the power
supply pins.
IOLITE® V20-1 140/153