4.3.3. IOLITEi: Multi channel device
IOLITEi multi-channel modules are fully compatible with the DIN rail mount. Chassis offers an easy
clip-in mechanism for mounting to all standard industrial DIN rail mounts.
IOLITEI DAQ devices use RJ45 connectors which allow easy connection of modules with standard
low-cost Ethernet/EtherCAT cables.
Important
For the power supply we have two TBLOCK connectors so the devices can be daisy chained with
each other.
4.3.2.8. IOLITE - Multi channel: Renders
IOLITE multi channel device
*Old render- the new IOLITEi has two power connectors
To Next Page
Loading...
Need help?
General
