Warning
Do not plug the powered network cable directly into the PC network port. It may damage the
PC.
3.2.1. DewesoftX® Settings IOLITE®
The connected device will show up in the DewesoftX® settings. Click on the Options button at the top
right, and then on the Settings item in the pop-up to open the DewesoftX® settings dialogue.
DewesoftX® settings
In the Devices section, you can see the connected IOLITE® slices. When you select one of them, the
properties pane at the right will show the related data e.g. Serial number, Firmware version, etc.
To Next Page
Loading...
