DEWESOFT IOLITE - Iolitei-8 Xdi-4 Xdo: Power In: Pinout; Iolitei-8 Xdi-4 Xdo: Power Out: Pinout

IOLITE®
TECHNICAL REFERENCE MANUAL
5.1.7.4. IOLITEi-8xDI-4xDO: Power Out: Pinout
Power out connector: pin-out (terminal block male)
Pin
Name
Description
1
PWR OUT
Output voltage
2
GND
Ground
PWR OUT connector (on the device): OMNIMATE Signal SL 2.50/02/90G
Mating connector (for the cable): OMNIMATE Signal BLF 2.50/02/180
5.1.7.5. IOLITEi-8xDI-4xDO: Power In: Pinout
Power in connector: pin-out (terminal block male)
Pin
Name
Description
1
+ PWR IN DI
Input voltage
2
- PWR IN DI
Input ground
PWR OUT connector (on the device): OMNIMATE Signal SL 2.50/02/90G
Mating connector (for the cable): OMNIMATE Signal BLF 2.50/02/180
IOLITE® V20-1 74/153