IOLITE chassis can be configured with up to 12
slots, each featuring high-quality input amplifiers.
Currently, the following amplifiers are available:
● 6xSTG: universal analogue and strain gage
amplifiers. Compatible with Dewesoft smart
interface DSI adapters
● 6xSTGS: A dedicated module for strain
measurement with new type ADC
(24-bit-delta-sigma with anti-aliasing filter)
● 8xLV: Isolated 8-channel low voltage module.
This module is a perfect choice for a
general-purpose voltage input data
acquisition module due to high accuracy and
high channel-to-channel and
channel-to-ground isolation.
● 16xLV: Isolated 16-channel low voltage
module.
● 8xLA: Isolated 8-channel low current
module.
● 8xTH: isolated thermocouple amplifier
● 32xDI: 32 channel digital input
● 32xDO: 32 channel digital output with
watchdog functionality
● 8xDI 4xDO: 8 digital input and 4 digital
output channels.
● 8xRTD: isolated amplifiers for measurements
with a resistance temperature detector
● 4xCNT: 4 channel digital counter input with
SuperCounter® technology.
● 16xAO: 16 analogue out channels
To Next Page
