IOLITE®
TECHNICAL REFERENCE MANUAL
depends on EtherCAT master cycle time
open collector with active internal pullup to 5 V
max 50 V, 2 A (resistive load, unprotected)
5 V, max. 40 mA (internally limited)
Max. switching frequency for internal PWM
Galvanic isolation CH, GND
Non-Isolated Sensor Power Supply
5 V +/- 10 %, 300 mA max.
Max. combined load on +5 V and +12 V pins: 1.5 W reduced by
the load already present on +Vin pin
12 V +/-10 %, 100 mA max.
Max. combined load on +5 V and +12 V pins: 1.5 W reduced by
the load already present on +Vin pin
EtherCAT Bus Supply Voltage, 200 mA max. (see 1.)