Dickey-John Seed Manager SE User Manual

OPERATOR'S MANUAL
OPERATE/ 39
Dj SEED MANAGER® SE PLANTER MONITOR
BENCHMARK Series® 11001-1218-200112 Rev A
A. OPERATE MODE
Performance of the following Operate
Mode functions assumes the console has
been properly installed and setup as
detailed in the INSTALLATION and
SETUP MODE chapters respectively.
Figure 41 lists all Operate Mode
functions and shows which are available
in the Speed Area Mode (defined later
in this chapter). Notice, this list includes
all the function names on the three (3)
Operate Mode switches, plus the Run
Hours function, which is performed
automatically.
B. RUN HOURS
This is defined as the total number of
accumulated hours, in 0.1 hour incre-
ments, the console has been powered.
Run Hours are not accumulated during
an ALL ROWS FAILED condition or if
a lift switch is installed and the implement
is in the up position. The Run Hours
total is displayed for five (5) seconds
immediately following the power up
sequence. The SETUP switch or any of
the three Operate Mode switches can be
pressed during the display of the Run
Hours to advance immediately to the
OPERATE MODE
Operate Mode Function Name Available in Speed Area Mode
Run Hours Yes
Population No
Seed Spacing No
Ground Speed Yes
Fan Speed Yes
Shaft Speed Yes
Pressure Yes
Area Accumulator Yes
Seed Count No
Distance Accumulator Yes
Figure 41

Dickey-John Seed Manager SE Specifications

General

Brand	Dickey-John
Model	Seed Manager SE
Category	Measuring Instruments
Language	English