EasyManuals Logo

Dickey-John Seed Manager SE User Manual

Dickey-John Seed Manager SE
73 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
OPERATOR'S MANUAL
OPERATE/ 43
Dj SEED MANAGER® SE PLANTER MONITOR
BENCHMARK Series® 11001-1218-200112 Rev A
5. Ground Speed
This is the ground speed in MPH (Km/
h), with 0.1 resolution, as measured by
the ground speed sensor. This function
is selected by pressing the OPERATE 1
switch until the SPEED message appears
on the display. The ground speed
sensor can be either radar, Hall Effect,
or reluctance type. Figure 47 shows a
ground speed of 5.6 MPH.
6. Fan Speed
This is the rotational speed of any Fan
the user wishes to monitor. A Hall
Effect type sensor senses points on a fan
to a resolution of 0.1 RPM. This
function is selected by pressing the
OPERATE 2 switch until F1 or F2 is
displayed in the lower numerical display.
Figure 48 shows a fan speed of 275.8
RPM.
Figure 47
Ground Speed Display
Figure 48
Fan Speed Display

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dickey-John Seed Manager SE and is the answer not in the manual?

Dickey-John Seed Manager SE Specifications

General IconGeneral
BrandDickey-John
ModelSeed Manager SE
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals