Dickey-John Seed Manager SE User Manual

OPERATOR'S MANUAL
ALARM/ 49
Dj SEED MANAGER® SE PLANTER MONITOR
BENCHMARK Series® 11001-1218-200112 Rev A
Priority levels are assigned to the Seed
Manager® SE alarms as shown in Figure
54, with level one (1) being the highest. If
two alarm conditions are detected at the
same time, only the higher priority alarm
is displayed. If they are the same level,
both are displayed simultaneously.
NOTE: A Row Failure Alarm will
acknowledge the audible alarm only and
will not clear the display. To clear a Row
Failure Alarm the condition must be
fixed, or the row must be turned OFF in
SETUP MODE.
ALARMS
Unless indicated below, when an alarm
condition occurs, the console exits the
current Operate Mode function to
display the alarm. It returns to that
Operate Mode function only after the
alarm condition ceases or the ALARM
switch has been pressed to acknowledge
the alarm condition (except for a Row
Failure Alarm).
A warning alarm is accompanied by a
beeping sound which lasting for a fixed
period or time, which is relative to its
priority level. The higher the priority, the

Dickey-John Seed Manager SE Specifications

General

Brand	Dickey-John
Model	Seed Manager SE
Category	Measuring Instruments
Language	English