DigiDesign C24 User Manual

Chapter 6: C|24 Pro Tools Controls 57
Scrub/Shuttle Controls
Scrub/Shuttle Wheel
The Scrub/Shuttle wheel is used for cursor loca-
tion, scrubbing, zooming, window navigation,
and banking faders.
Scrub Switch
The Scrub switch places the transport in Scrub
mode, which lets you scrub from the cursor po-
sition or across a selection.
Trim Switch
(Pro Tools HD Only)
The Trim switch places the transport in
Trim/Scrub mode, which lets you scrub to locate
an edit point, then trim to that point.
Shuttle Switch
(Pro Tools HD Only)
The Shuttle switch places the transport in Shut-
tle mode, which lets you scrub at several times
normal speed.
Bank/Nudge Switches
Bank Switches
The Bank switches move the display of tracks on
C|24 to the left or to the right 24 channels at a
time. If the “Mix/Edit Window Follows Bank Se-
lection” option is selected, the Pro Tools on-
screen display moves to mirror the track display
on C|24.
Nudge Switch
The Nudge switch, used with the Bank switches,
moves the display of tracks on C|24 to the left or
to the right one channel at a time. If the
“Mix/Edit Window Follows Bank Selection” op-
tion is selected, the Pro Tools on-screen display
moves to mirror the track display on C|24.
Scrub/Shuttle controls
Trim switch
Shuttle
switch
Scrub
switch
Scrub/
Shuttle
wheel
Bank/Nudge switches
Nudge switch
Bank Left
switch
Bank Right
switch

DigiDesign C24 Specifications

General

Type	Control Surface
Channels	24
Compatibility	Pro Tools
Faders	24 motorized
Inputs	8 analog line inputs
Outputs	8 analog line outputs
Aux Sends	N/A (Control surface only)
Connectivity	Ethernet, MIDI
Display	LCD scribble strips
Power Supply	External power supply