DigiDesign C24 User Manual

C|24 Guide58
Transport Switches
The C|24 Transport switches correspond to the
buttons in the Pro Tools Transport window.
Rewind Switch Moves backward through the
Pro Tools session beginning from the current
cursor position, as long as the switch is held.
Fast Forward Switch Moves forward through the
Pro Tools session beginning from the current
cursor position, as long as the switch is held.
Stop Switch Stops playback of the Pro Tools ses-
sion.
Play Switch Begins playback of the Pro Tools ses-
sion from the current cursor position.
Record Switch Arms Pro Tools for recording. The
exact function depends on the current Pro Tools
record mode (QuickPunch, TrackPunch, Wait
for Note, Pause).
See “Navigating with the Transport” on page 99.
Masters Switch
The Masters switch cycles temporary display of
Master Fader tracks and VCA Master tracks
(Pro Tools HD only) to the right side of the C|24
faders. The Masters switch flashes to indicate
display of Master Faders or VCA Master tracks.
Flip Switch
The Flip switch invokes Flip mode. Flip mode
transfers control assignments from rotary en-
coders to the channel faders, which lets you use
the touch-sensitive faders to edit and automate
pan, send, PRE, and plug-in parameter values.
The Flip switch flashes to indicate Flip mode.
You can enter Assign mode while in Flip mode,
and use the faders (instead of the encoders) to
scroll through lists when assigning inputs, out-
puts, inserts and sends.
See “Flip Modes” on page 86.
Transport switches
Fast Forward
switch
Stop
switch
Play
switch
Rewind
switch
Record
switch
Masters switch
Flip switch
Masters switch
Flip switch

DigiDesign C24 Specifications

General

Type	Control Surface
Channels	24
Compatibility	Pro Tools
Faders	24 motorized
Inputs	8 analog line inputs
Outputs	8 analog line outputs
Aux Sends	N/A (Control surface only)
Connectivity	Ethernet, MIDI
Display	LCD scribble strips
Power Supply	External power supply