C|24 Guide64
Master Control Room Output
Controls
Mute Switch
The Mute switch mutes all Control Room mon-
itor outputs (Main and Alt), but does not mute
Headphone, Cue, and Studio LS outputs. The
Mute switch lights to indicate that Control
Room outputs are muted.
Dim Switch
The Dim switch applies an adjustable gain re-
duction to all Control Room monitor outputs
(Main, Alt, and Stereo 1 and 2), but does not af-
fect Headphone, Cue, and LS outputs. The de-
fault gain reduction amount is 20 dB. Dim is au-
tomatically engaged when Talkback is engaged.
The Dim switch lights to indicate that Control
Room outputs are dimmed.
Mono Switch
The Mono switch sums the Left and Right Con-
trol Room outputs (Main, Alt and Stereo 1
and 2), deactivates the C, Ls, Rs, and LFE chan-
nels, and lowers monitor output by an adjust-
able amount. The default gain reduction is 6 dB.
Headphone, Cue, and LS outputs are not af-
fected. The Mono switch lights to indicate that
it is active.
Control Room Input Selectors
Control Room Input selections are mutually ex-
clusive (X-OR) unless the Sum switch is en-
gaged, when they are additive.
Main Switch
The Main switch routes the Main Surround in-
put (Pro Tools In 1-6) to the Control Room out-
puts. The Main switch lights to indicate that it is
active.
Alt Sur Switch
The Alt Sur switch routes the Alternate Surround
input (Surround In 1-6) to the Control Room
outputs. The Alt Sur switch lights to indicate
that it is active.
Stereo 1 and Stereo 2 Switches
The Stereo 1 and Stereo 2 switches route the Ex-
ternal Stereo inputs (Ext St 1 and Ext St 2) to the
Control Room outputs.
These stereo inputs appear in the Left and Right
Control Room output channels only and are ex-
cluded from the C, Ls, Rs, and LFE channels.
The Stereo 1 and Stereo 2 switches light to indi-
cate that they are active.
C|24 Monitor section (bottom)
Dim
switch
Mono
switch
Mute
switch
Main
switch
Alt Sur
switch
Stereo 1
switch
Stereo 2
switch
Sum
switch
To Next Page
Loading...
Need help?
General
