DigiDesign C24 User Manual

Chapter 8: Operating Views and Modes 77
3 For the Send you want to display, press the en-
coder switch that corresponds to “more.”
The LCD displays show the track name in the
top row and the Send position and Send path in
the bottom row, followed by Send Mute, track
Solo, Send Automation Safe, Send Pre/Post, Fol-
lows Main Pan, and Send Volume displays.
The LCD displays also show pan parameters as
follows:
Stereo Output Path Sends assigned to a stereo
Send path show Left-Right pan. Stereo Sends as-
signed to a stereo Send path also Left/Right Pan
Link and Front Inverse Link controls.
Multichannel Output Path (Pro Tools HD Only)
Sends assigned to a multichannel output path
can show Front Pan, Rear Pan, Front/Rear Pan,
Front Divergence, Rear Divergence, Front/Rear
Divergence, Center %, and LFE level, depending
on the output format. Stereo tracks assigned to a
multichannel output path also show Pan Link
controls (Left/Right Link, Front Inverse Link,
Rear Inverse Link, and Front/Rear Inverse Link).
To adjust a Send’s volume in Expanded Send view:
1 Press the Send switch in the track’s channel
strip.
2 For the Send you want to display, press the en-
coder switch that corresponds to “more.”
3 Turn the encoder that corresponds to “Vol-
ume.”
To adjust a Send’s pan controls in Expanded Send
view:
1 Press the Send switch in the track’s channel
strip.
2 For the Send you want to display, press the en-
coder switch that corresponds to “more.”
3 Do one of the following:
• If the Send is a mono Send, toggle the L/R
switch in the Channel Bar so that it is unlit.
– or –
• If the Send is a stereo Send, toggle the L/R
switch in the Channel Bar to show the Left
(unlit) or Right (lit) side of the stereo track.
4 Turn the rotary encoders for the available pan
or divergence parameters in the LCD displays.
To toggle the Send mute, track solo, or Send
automation safe state in Expanded Send view:
1 Press the Send switch in the track’s channel
strip.
2 For the Send you want to display, press the en-
coder switch that corresponds to “more.”
3 Press the encoder switch that corresponds to
“Mute,” “Solo,” or “Safe” to toggle the function
On or Off.
When Send Mute, track Solo or Send Automa-
tion Safe is On, the corresponding encoder
switch is lit.
To toggle the pre-/post-fader state of a Send in
Expanded Send view:
1 Press the Send switch in the track’s channel
strip.
2 For the Send you want to display, press the en-
coder switch that corresponds to “more.”
3 Press the encoder switch that corresponds to
“Pre/Pst” to toggle the pre-/post-fader state.

DigiDesign C24 Specifications

General

Type	Control Surface
Channels	24
Compatibility	Pro Tools
Faders	24 motorized
Inputs	8 analog line inputs
Outputs	8 analog line outputs
Aux Sends	N/A (Control surface only)
Connectivity	Ethernet, MIDI
Display	LCD scribble strips
Power Supply	External power supply