Page 52
telemetry data enabled).
The sequence of operations for using these software via Bluetooth is the following:
1) in the AIR-BT, enter in the menu “Telemetry BT”
2) run the software on the external device (eg XCSoar on Android Smartphone)
3) when AIR-BT receives from the external device the confirmation of connection it automatically exits from
the "Telemetry BT" menu, returns on the current page of instruments, turn on the Bluetooth icon and
activate the continuous transmission of real-time Digifly telemetry data at high speed
In case of problems, to exit press the
key on the AIR-BT.
.
To Next Page
Loading...
Need help?
General
