TalkMasterFOCUSAdminConsoleReferenceManual
76
Password - Specify the Password* that has been assigned in the camera software.
Preview - Click to verify that the video feed. If the Video Feed does not appear, verify the Video Source
parameters with the camera software.
New - Click to create a new Video Feed for the list.
Delete - Click to remove the selected video feed from the list.
Save - Click to save the video feed for use with the iEnterprise server.
To create a new camera feed:
Click New
Enter the cameras name, type, and address.
Enter the Camera's User name* and Password*
Click Save
Click Preview to view the feed in the window just below.
Once the Video Sources have been created, they can be associated with specific IP Endpoints by
specifying the Associated Video Source in the IP Endpoints --> Options 3 sub tab. Video Sources can
also be monitored. The Video Sources can also be monitored continuously in the Operator Console by
logging in to the Operator Console as an admin and selecting menu option View --> Monitored Video.
* Refer to the camera documentation for specific information such as the Source Address, Type,
Username, and Password.
To Next Page
Loading...
